Insert Nut for Hard Wood (IN02)

Insert Nuts for Hardwood (IN02) feature an unthreaded lead to make assembly easier, ideal for use in hard wood and MDF board but can also be appropriate for some soft woods, such as chipboard and plywood.

They are RoHS compliant. Assembly can be manual, semi or fully automated using the appropriate hex drive of sizes between 4mm and 12mm.

Note: A pilot hole slightly smaller than the insert’s diameter should be predrilled.

These Insert Nuts for Hard Wood are manufactured in Steel with or without Zinc Plating, as well as Brass and Stainless Steel. They are available in diameters from 8mm to 22mm, with a standardised internal thread between M4 and M12.

Available in a huge range of sizes – see availability chart below for full specifications.

Non-standard sizes, materials and finishes are available to order as specials, including small volume manufacture, modifications and custom parts made to drawings.

8mm	8	M4	4	7.0 – 7.5
8mm	10	M4	4	7.0 – 7.5
8mm	12	M4	4	7.0 – 7.5
10mm	8	M5	5	8.0 – 8.5
10mm	10	M5	5	8.0 – 8.5
10mm	12	M5	5	8.0 – 8.5
10mm	14	M5	5	8.0 – 8.5
12mm	10	M6	6	10.0 – 10.5
12mm	12	M6	6	10.0 – 10.5
12mm	15	M6	6	10.0 – 10.5
12mm	18	M6	6	10.0 – 10.5
12mm	20	M6	6	10.0 – 10.5
12mm	23	M6	6	10.0 – 10.5
12mm	25	M6	6	10.0 – 10.5
14mm	12	M8	8	12.0 – 12.5
14mm	15	M8	8	12.0 – 12.5
14mm	18	M8	8	12.0 – 12.5
14mm	30	M8	8	12.0 – 12.5
16mm	14	M8	8	14.0 – 14.5
16mm	18	M8	8	14.0 – 14.5
16mm	23	M8	8	14.0 – 14.5
16mm	30	M8	8	14.0 – 14.5
18.5mm	15	M10	10	16.0 – 16.5
18.5mm	20	M10	10	16.0 – 16.5
18.5mm	25	M10	10	16.0 – 16.5
18.5mm	30	M10	10	16.0 – 16.5
18.5mm	40	M10	10	16.0 – 16.5
22mm	30	M12	12	20.0
22mm	40	M12	12	20.0

= Available Size not listed? Please make an enquiry – we may be able to provide it.