Heavy-Duty Insert Nut for Soft Wood (IN11)

Heavy Duty Insert Nuts (IN11) are available in long lengths, up to 100mm. This Steel fastener is excellent for use in a wide range of heavy-duty applications and is RoHS compliant. Some sizes are also CE compliant (please check the availability table below for information).

Designed for use in softwoods such as conifers, plywood and chipboards, this robust fastener exists in diameters from 10mm to 25mm. It has a blind hole in lengths from 15mm to 24mm with a standardised internal thread of between M5 and M16.

A pilot hole of between 7.6mm and 22mm should be drilled and this slot-less fastener can be installed manually. It is, however, more common to use a semi or fully automated process such as a specifically designed driver which has a high workload ball bearing (recommended tool available from Fastenright).

Heavy Duty Insert Nut for Soft Wood, available in a huge range of sizes, with other sizes available to order.

Non-standard sizes and finishes are available to order as specials, including small volume manufacture, modifications and custom parts made to drawings.

10mm	30	M5	15	7.6 – 8.0
12mm	40	M6	15	9.4 – 9.9
12mm	60	M6	15	9.4 – 9.9
12mm	80	M6	15	9.4 – 9.9
16mm	60	M8	18	12.6 – 13.3
16mm	70	M8	18	12.6 – 13.3
16mm	80	M8	18	12.6 – 13.3
16mm	100	M8	18	12.6 – 13.3
18.5mm	70	M10	20	15.1 – 15.8
18.5mm	80	M10	20	15.1 – 15.8
18.5mm	100	M10	20	15.1 – 15.8
22mm	80	M12	24	18.3 – 19.0
22mm	100	M12	24	18.3 – 19.0
25mm	80	M16	24	21.3 – 22.0
25mm	100	M16	24	21.3 – 22.0

= Available Size not listed? Please enquire – we may be able to provide it.