Rivet Nut Flange Head Half Hex Closed End

Flange Head Half Hex Closed End Rivet Nuts are typically used where the threat of moisture or contamination into the product must be prevented – meaning the rivet nut must be corrosion resistant.

This rivet nut and it’s flange head make it suitable for load bearing applications, as well as having a hexagonal body to reduce the problem of the nut turning post-installation.

Rivet Nut Flange Head Half Hex Closed End fasteners are manufactured from Zinc Plated Steel, A2 Stainless Steel and A4 Stainless Steel as standard.

Available at Fastenright in sizes M3 to M12 as standard.

Non-standard sizes and materials are available to order as specials, including small volume manufacture, modifications and bespoke parts made to drawings. Minimum order quantities apply.

Metric Technical Data & Availability
Diameter	Grip Range (mm)	Hole A/F (mm)	Body A/F (mm)	Head Diameter b (mm)	Head Thickness k (mm)	Length L (mm)	Availability
M3	0.5 – 2.5	4.9	4.8	8.0	0.75	15.5
M4	0.5 – 3.0	5.9	5.8	9.3	1.0	16.5
M4	0.5 – 2.5	6.1	6.0	9.0	1.0	17.0
M5	0.5 – 3.0	7.1	7.0	10.0	1.0	19.0
M5	0.5 – 3.0	6.9	6.8	10.3	1.0	19.0
M6	0.5 – 3.0	8.9	8.8	12.3	1.5	22.0
M6	0.5 – 3.0	9.1	9.0	12.0	1.5	22.5
M6	3.0 – 5.0	9.1	9.0	12.0	1.5	25.0
M8	0.5 – 3.0	11.1	11.0	15.0	1.5	25.0
M8	0.5 – 3.0	10.9	10.8	14.3	1.5	26.5
M10	0.5 – 3.0	12.9	12.8	16.3	2.0	28.5
M10	0.5 – 3.0	13.1	13.0	17.0	1.5	30.0
M12	3.0 – 6.0	15.9	15.8	23.0	2.0	33.5
= Steel Zinc Plate // = A2 Stainless Steel // = A4 Stainless Steel Size not listed? Please make an enquiry – we may be able to provide it.