Next: Fine Pitch Threaded Rods Grade 10.9 (DIN 976) 
Prev: Stainless Steel Threaded Rods A4 
This Grade 8.8 Threaded Bar with a hot-dip galvanised surface finish is corrosion-resistant and hosts a number of other positives. The hot-dip galvanising of the threaded bar can elongate the life of the product dependant on industry of use, as well as providing a competitive initial cost and a low lifetime cost due to extended maintenance intervals.
There is also three-way protection due to the galvanising, meaning that the coating weathers at a very slow rate, corrodes preferentially to provide cathodic protection and prevents rust which can undermine the coating on the Allthread.
Available from a thread size of M10 and above, and in lengths ranging from one to three metres, we generally stock the many thread sizes and lengths listed.
Non-standard sizes and cut lengths of Galvanised Threaded Bar are available to order, with short lead times.
For more information, please contact us.
| Threaded Rods DIN 976 – Surface Finish: Hot-Dip Galvanized | |||
| Thread Diameter | 1000 mm | 2000 mm | 3000 mm |
| M10 |  |
Call Us | Call Us | |||||||||
| M12 | |
|
|
|||||||||
| M16 | |
|
|
|||||||||
| M20 | |
|
|
|||||||||
| M24 | |
|
|
|||||||||
| M27 | |
Call Us | Call Us | |||||||||
| M30 | |
|
|
|||||||||
| M33 | |
Call Us | Call Us | |||||||||
| M36 | |
|
|
|||||||||
| M39 | |
|
|
|||||||||
| M42 | |
Call Us | |
|||||||||
| M45 | |
Call Us | Call Us | |||||||||
| M48 | |
Call Us | |
|||||||||
| M56 | Call Us | Call Us | Call Us | |||||||||
 = Grade 8.8Size not listed? Please enquire – we may be able to provide it. |
||||||||||||
