6 Lobe Pin TX Pan Thread Forming Security Screw

Security 6 Lobe Pin TX Pan Thread Forming Screws are primarily used with Plastics and other soft materials, requiring a pre-drilled or moulded hole for installation.

These screws offer medium security resistance against vandals and thieves at a relatively low cost. They are a reusable 2 way security fastener, so can be removed if maintenance is required.

The vandal-resistant 6 Lobe Pin Torx drive requires a special screw driver, key wrench or tool bit to install, also available from Fastenright.

They are often referred to by other names such as ‘Star Pin Drive’, ‘Tamper Torx®’, ‘Torx® Pin’, ‘Resistorx®’ and ‘6 Lobe Pin Torx’, and can be used alongside a range of nuts for added security.

They host a 30° thread angle, allowing the screw to form a secure engagement with the fastening material.

6-Lobe Pin TX Pan Thread Forming Screws offer reduced slippage or cam-out compared to the more common Phillips or 2-Hole drives, which in turn reduces the risk of damage to the drive tip, screw head or application.

Manufactured from Zinc Steel, Black Steel and A2 Stainless Steel as standard, with others available on request.

Available from Fastenright in diameters from M3 to M6 and lengths ranging from 4mm to 80mm.

Non-standard sizes and finishes are available to order as specials, including small volume manufacture, modifications and custom parts made to drawings.

4mm
5mm
6mm
7mm
8mm
9mm
10mm
11mm
12mm
13mm
14mm
15mm
16mm
17mm
18mm
20mm
22mm
25mm
30mm
35mm
40mm
45mm
50mm
55mm
60mm
65mm
70mm
75mm
80mm

= A2 Stainless Steel //  = Steel (Zinc or Black Zinc) Size not listed? Please make an enquiry – we may be able to provide it.