Socket Shoulder Screws ISO 7379

Socket shoulder screws to ISO 7379 also known as shoulder bolts, stripper bolts or precision shoulder screws have a plain (un-threaded) shoulder section located between the head and the thread.

The plain shouldered section is larger in diameter than the threaded section of the fastener and is commonly used as a pivot, shaft or stationary guide in applications such as pulleys, cams, gears, latches etc.

The outside head of the socket shoulder screw is commonly ‘knurled’ allowing better manual tightening and grip from the user / installer.

Note: Socket shoulder screws are measured differently than most other socket fasteners i.e. when specifying a standard socket button a user would specify the diameter and total length required under the head. With socket shoulder screws the threaded length is a constant, it is the length of the unthreaded larger diameter shoulder that is the variable.

ISO 7379 socket shoulder screws / shoulder bolts are available from Fastenright in Steel grade 12.9, A2 Stainless Steel and A4 Stainless Steel.

Sizes from M5 to M20, with lengths ranging from 6mm to 120mm. UNC, UNF, BSW and BSF sizes are also available. (Note: M5 is the threaded diameter and the shoulder diameter will be larger)

Non-standard sizes, materials and finishes are available to order as specials, including small volume manufacture, modifications and bespoke parts made to drawings. Minimum order quantities apply.

6mm
10mm
12mm
16mm
20mm
25mm
30mm
35mm
40mm
45mm
50mm
60mm
70mm
80mm
90mm
100mm
120mm

= Available Size not listed? Please make an enquiry – we may be able to provide it.