Next: Titanium Flat Washers (DIN 125) 
Prev: Titanium Nyloc Nuts (DIN 985) 
Titanium Full Nuts are created to DIN 934 standard and are a commonly used mating part alongside a bolt, threaded rod or parallel threaded screw.
They are also often referred to as Hexagon Nuts as they host six-sides. which make them easier to work with tools.
These nuts work through a combination of friction on the thread and compression of the parts together. Full thread engagement is also achievable.
Full Nuts are able to fasten a bolt or screw securely through a threaded hole, with the threads tending to be right-handed.
It is advisable to match the material of the nut, in this case titanium, with the material of the fastener.
Available at Fastenright as standard in Grade 2 Titanium and Grade 5 Titanium, in thread sizes M1.6 to M56.
Non-standard sizes, materials and finishes are available to order as specials, including small volume manufacture, modifications and bespoke parts made to drawings. Minimum order quantities apply.
| Technical Data & Availability | |||||||||||||||
| Thread Diameter (d1) | m (mm) | S (mm) | Availability | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M1.6 | 1.3 | 3.2 |   |
| M2 | 1.6 | 4.0 | |
| M3 | 2.4 | 5.5 | |
| M4 | 3.2 | 7.0 | |
| M5 | 4.0 | 8.0 | |
| M6 | 5.0 | 10.0 | |
| M8 | 6.5 | 13.0 | |
| M10 | 8.0 | 17.0 | |
| M12 | 10.0 | 19.0 | |
| M14 | 11.0 | 22.0 | |
| M16 | 13.0 | 24.0 | |
| M20 | 16.0 | 27.0 | |
| M22 | 18.0 | 32.0 | |
| M24 | 19.0 | 36.0 | |
| M27 | 22.0 | 41.0 | |
| M30 | 24.0 | 46.0 | |
| M33 | 26.0 | 50.0 | |
| M36 | 29.0 | 55.0 | |
| M39 | 31.0 | 60.0 | |
| M42 | 34.0 | 65.0 | |
| M45 | 36.0 | 70.0 | |
| M48 | 38.0 | 75.0 | |
| M52 | 42.0 | 80.0 | |
| M56 | 45.0 | 85.0 | |
| = Grade 2 Titanium // = Grade 5 Titanium Size not listed? Please make an enquiry – we may be able to provide it. |
